Publikationen 2012

Zeitschriftenbeiträge

Entacher K., Öttl M., Petutschnigg A., Bauer R. (2012): „Finite-Elemente-Analyse von Holz auf Basis von CT-Daten“. holztechnologie 53 (2012) 1, S. 29-34.

Grünewald T., Ostrowski S., Petutschnigg A., Musso M., Wieland S. (2012): "Structural analysis of wood-leather panels by Raman spectroscopy". Peer reviewed article in BioRes. 7(2), 1431-1439.

Hinterreiter S., Hartmann H., Turowski P. (2012): "Method for determining bridging properties of biomass fuels-experimental and model aproach". Biomass Conversion and Biorefinery. Processing of Biogenic Material for Energy and Chemistry. ISSN 2190-6815, Volume 2, Number 2, DOI:10.1007/s13399-012-0033-7, S. 109-121.

Kain G.,Teischinger A., Musso M., Barbu M.-C., Petutschnigg A. (2012): Stoffliche Rindennutzung in Form von Dämmstoffen. holztechnologie 53(2012)4, S. 31-37.

Kolbitsch C., Link M., Petutschnigg A., Wieland S., Tondi G. (2012): Microwave Produced Tannin-furanic Foams. Peer reviewed article in Journal of Materials Science Research, Vol. 1, No. 3, S. 84-91. doi:10.5539/jmsr.vln3p84. 

Rathke J., Huber H., Teischinger A., Müller U., Hansmann C. (2012): Verwendbarkeit von Laubschwachholz in der Sägeindustrie. holztechnologie 53(2012)5, S. 46-50.

Schuller-Götzburg P., Entacher K., Petutschnigg A., Pomwenger W., Watzinger F. (2012): Sinus Elevation with a Cortical Bone Graft Block: A Patient-Specific Three-Dimensional Finite Element Study. In: The International Journal of Oral & Maxillofacial Implants, Volume 27, Number 2, 2012, SCI-cited, S. 359 – 368.

Standfest G., Dunky M., Kranzer S., Plank B., Salaberger D., Petutschnigg A. (2012): 3D pore size characterisation by means of image analysis and mathematical morphology. holztechnologie 53(2012)5, S. 39-44.

Standfest G., Kutnar A., Plank B., Petutschnigg A., Kamke F.A., Dunky M. (2012): Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography. In: Wood Science and Technology, Vol 46, Number 4, July 2012, 19 Seiten, SCI-cited. DOI: 10.1007/s00226-012-0496-5.

Standfest G., Wimmer T., Bajraktari A., Schnabel T., Petutschnigg A. (2012): „Ausgewählte mechanische Eigenschaften der Zerreiche (Quercus cerris L.)“. holztechnologie 53 (2012) 1, S. 5-10.

Standfest G., Schnabel T., Bajraktari A., Wimmer T., Ebner M, Petutschnigg A. (2012): Ausgewählte physikalische Eigenschaften der Zerreiche (Quercus cerris L.). holztechnologie 53 (2012) 3, S. 5-9.

Stassen O., Tirschmann J., Barbu M.C., Hoepner W.-D., Rüter S. (2012): "Einsparmöglichkeiten nicht ausgeschöpft". Holz-Zentralblatt Nr. 28, erschienen am 13. Juli 2012, S.734-735.

Tondi G., Wieland S., Lemenager N., Petutschnigg A., Pizzi A., Thevenon M.-F. (2012): “Efficacy of Tannin in Fixing Boron in Wood: Fungal and Termite Resistance”. Peer-reviewed review article in BioResources 7(1), 1238-1252.

Tondi G., Wieland S., Wimmer T., Thevenon M.F., Pizzi A., Petutschnigg A. (2012): “Tannin-boron preservatives for wood buildings: mechanical and fire properties“. European Journal of Wood and Wood Products, published online: 01 March 2012. 8 Seiten, peer reviewed publication, DOI: 10.1007/s00107-012-0603-1.

Tondi G., Palanti S., Wieland S., Thevenon M.-F., Petutschnigg A., Schnabel T. (2012): Durability of tannin-boron-treated timber. BioResources 7(4), 5138-5151, peer reviewed article.

Treusch O.G., Petutschnigg A. (2012): “A COMBINATION OF POLYETHYLENIMINE AND PHENOLIC RESIN AS AN ADHESIVE FOR WOOD-BASED PANELS”. Peer-reviewed article in: BioResources 7(1), 789-798.

Bücher und Buchbeiträge

Irle M.A., Barbu M.C., Reh R., Bergland L., Rowell R.M. (2012): Wood Composites. Handbook of Wood Chemistry and Wood Composites, Second Edition, edited by Roger M. Rowell. Part III, Wood Composites, Chapter 10, S. 321-412.

Wieland S., Schnabel T. (2012): COST Action FP1006, Workshop Basics for Chemistry of Wood Surface Modification, April 25-27, 2012, Kuchl/Salzburg, Austria. Book of Abstracts. 101 Seiten. ISBN 978-3-200-02623-0, erschienen April 2012.

Konferenzbeiträge und Conference Proceedings

Barbu M.C. (2012): Developments of wood based composites and the processing industries. Beitrag in: COST Action FP1006, Workshop Basics for Chemistry of Wood Surface Modification, April 25-27, 2012, Kuchl/Salzburg, Austria. Book of Abstracts. ISBN 978-3-200-02623-0, S. 73-75.

Charwat-Pessler J. (2012): 3D Analysis of Heterogenous and Biogenic Structures Based on Bone Augmentation Material. Posterpräsentation in Postersession I “Analysis and Algorithms” im Rahmen der iCT2012 – Conference on Industrial Computed Tomography, 19th - 21st September 2012, Wels/Austria

Grünewald T., Petutschnigg A., Ostrowski S., Wieland S. (2012): "A simple fiber-particle model for artificial composites explaining non-linear material behavior". 5. Wiener Biomaterialsymposium, 20.11.2012, Posterpräsentation.

Tondi G., Link M., Kolbitsch C., Wieland S. (2012): „Tannin foams: A natural insulation material“. Posterbeitrag in: Tagungsband 6, Intelligente Produktion im globalen Wettbewerb., 6. Forschungsforum der österreichischen Fachhochschulen, 11. – 12. April 2012, FH Joanneum Graz. ISBN 3-902103-42-6, S. 89-94.

Tondi G., Schnabel T., Thevenon M.-F., Petutschnigg A., Wieland S. (2012): Wood Modification by Tannin Infiltration. The Sixth European Conference on Wood Modification, Ljubljana, Slovenia, 17-18 September 2012, Book of Abstracts. ISBN 978-961-6144-34-6, S. 80.

Tondi G., Wieland S., Wimmer T., Petutschnigg A., Lemenager N., Pizzi A., Thévenon M.-F. (2012): Wood protection using tannin-boron associations. Beitrag in: COST Action FP1006, Workshop Basics for Chemistry of Wood Surface Modification, April 25-27, 2012, Kuchl/Salzburg, Austria. Book of Abstracts. ISBN 978-3-200-02623-0, S. 81-82.

Pratter I., Siebenhofer C., Petutschnigg A., Wieland S. (2012): “Development of a numerically controlled rotational dowel welding device for hand-held screwdrivers to determine and optimize important process parameters“. PTF BPI 2012 - 2nd Biennial International Conference on Processing Technologies for the Biobased Products Industries, , November 6-7, 2012, St. Simons Island,  GA, USA. S. 16.

Stöckler M., Steinwender F., Schnepps J., Blinzer J., Petutschnigg A., Holzer H. (2012): „Laser Treatment of Wood in Ski Industry – A Parameter“.PTF BPI 2012 - 2nd Biennial International Conference on Processing Technologies for the Biobased Products Industries, November 6-7, 2012, St. Simons Island,  GA, USA. S. 16-18.

Grünewald T., Petutschnigg A., Wieland S. (2012): “Structural Analysis of Wood-Leather Panels”. PTF BPI 2012 - 2nd Biennial International Conference on Processing Technologies for the Biobased Products Industries, November 6-7, 2012, St. Simons Island,  GA. S, USA. 39-40.

Wieland S., Mazela B. (2012): Bringing new functions to wood through surface modification – COST Action FP1006. Beitrag in: COST Action FP1006, Workshop Basics for Chemistry of Wood Surface Modification, April 25-27, 2012, Kuchl/Salzburg, Austria. Book of Abstracts. ISBN 978-3-200-02623-0, S. 14.

Wieland S., Mazela B. (2012): Bringing new functions to wood through surface modification: COST Action FP1006. The Sixth European Conference on Wood Modification, Ljubljana, Slovenia, 17-18 September 2012, Book of Abstracts. ISBN 978-961-6144-34-6, S. 89.

Wieland S., Stöckl U., Grünewald T., Ostrowski S. (2012): Wood-leather panels - A biological, fire retardant building material. International Union of Forest Research Organizations, 2012 IUFRO Conference, Division 5, Forest Products. 8-13 July ´12 - Estoril Congress Centre, Lisbon, Portugal. Proceedings and Abstracts Book, S. 139 - 140.

Vorträge

Barbu M.C. (2012): Developments of wood based composites and the processing industries. Vortrag zum Workshop “Basics for Chemistry of Wood Surface Modification, April 25-27, 2012, Kuchl/Salzburg, Austria” im Rahmen der COST Action FP1006.

Grünewald T. (2012): “Structural Analysis of Wood-Leather Panels”. Vortrag im Rahmen der PTF BPI 2012 - 2nd Biennial International Conference on Processing Technologies for the Biobased Products Industries, November 6-7, 2012, St. Simons Island, GA, USA (07.11.2012).

Petutschnigg A. (2012): “Perspectives of Wood Science and Technology Academic Programs in Europe”. PTF BPI 2012 - 2nd Biennial International Conference on Processing Technologies for the Biobased Products Industries, November 6-7, 2012, St. Simons Island,  GA, USA. Keynote Speech in Plenary Session I: “Emerging Issues for Academia and the Forest Products Industry”. (06.11.2012)

Tondi G. (2012): Wood Modification by Tannin Infiltration. The Sixth European Conference on Wood Modification, Ljubljana, Slovenia, 17-18 September 2012.

Wieland S. (2012): “Development of a numerically controlled rotational dowel welding device for hand-held screwdrivers to determine and optimize important process parameters“. Vortrag im Rahmen der PTF BPI 2012 - 2nd Biennial International Conference on Processing Technologies for the Biobased Products Industries, November 6-7, 2012, St. Simons Island, GA, USA (06.11.2012).

Wieland S. (2012): Bringing new functions to wood through surface modification – COST Action FP1006. Vortrag zum Workshop “Basics for Chemistry of Wood Surface Modification, April 25-27, 2012, Kuchl/Salzburg, Austria” im Rahmen der COST Action FP1006.

Wieland S. (2012): Wood-leather panels - A biological, fire retardant building material. Vortrag zur 2012 IUFRO Conference, Division 5, Forest Products. 8-13 July 12, Lisbon, Portugal.  

Wieland S. (2012): Bringing new functions to wood through surface modification: COST Action FP1006. The Sixth European Conference on Wood Modification, Ljubljana, Slovenia, 17-18 September 2012.

Sonstige

Barbu M.C., Salca E.A., Tudor E.M. (2012): "The 1st Workshop "Basics for Chemistry of Wood Surface Modification" at the University of Applied Sciences, Salzburg, Campus Kuchl, organized in April, in the frame of COST Action FP1006". PRO LIGNO Journal, Volume 8, Nr. 2, June 2012, pp100-102.

Tondi G. (2012): Preserving Wood the Tannin way. FDM Asia, Nov/Dec 2012, S. 16-19 [Journal]

Nach oben

Aktuell

Virtual Reality Summit an der FH Salzburg

Die VR-Community trifft sich in Salzburg! Am 5. Oktober, ab 14.00 Uhr, findet der erste...

mehr