Publikationen 2016

Zeitschriftenbeiträge

Barbu M.C., Paulitsch M. (2016): Universitäre Ausbildung für Holzwissenschaft in Europa und weltweit; Teil 14: Nordamerika – Die Lage der Forst- und Holzindustrie. Holztechnologie 57(4), S. 51-53.

Barbu M.C. (2016): Universitäre Ausbildung für Holzwissenschaft in Europa und weltweit; Teil 15: Nordamerika – Holzforschung und Holztechnologie. Holztechnologie 57(5), S. 53-56.

Barbu M.C. (2016): Universitäre Ausbildung für Holzwissenschaft in Europa und weltweit; Teil 16: Kanada. Holztechnologie 57(6), S. 52-55.

Charwat-Pessler J., Schraml R., Entacher K., Petutschnigg A. (2016): Tracking Logs with RGB Images within the Wood Supply Chain: A Preliminary Study on Image Acquisition. Forest Products Journal, Vol. 66, No. 3/4, S. 176-184.

Heinzmann B., Barbu M.C. (2016): Genauigkeit der fotooptischen Poltervermessung von
Industrieholz am Beispiel von FOVEA. Forstarchiv 87, S. 194-197.

Kaestner D., Petutschnigg A., Schnabel T., Illy A., Taylor A. (2016): Influence of Wood Surface Color on the Performance of Luminescent Pigments. Forest Products Journal, Vol. 66, No. 3/4, S. 211-213.

Kain G., Lienbacher B., Barbu M.-C., Plank B., Richter K., Petutschnigg A. (2016): Evaluation of relationships between particle orientation and thermal conductivity in bark insultion board by means of CT and discrete modeling. In: Case Studies in Nondestructive Testing and Evaluation (Article in press), available online 25 March, erschienen bei Elsevier, 9 Seiten.

Kain G., Barbu M.C., Petutschnigg A. (2016): Insulation material made from tree bark. Unasylva of FAO Nr. 247/248, Vol. 67(2-3), S. 67-75.

Luckeneder P., Gavino J., Kuchernig R., Petutschnigg A., Tondi G. (2016): Sustainable Phenolic Fractions as Basis for Furfuryl Alcohol-Based Co-Polymers and Their Use as Wood Adhesives. Polymers 2016, Volume 8, Issue 11, 396, 15 Seiten, published 14. Nov., doi:10.3390/polym8110396.

Reyer A., Tondi G., Berger R.J.F., Petutschnigg A., Musso M. (2016): Raman spectroscopic investigation of tannin‐furanic rigid foams. Vibrational Spectroscopy, 84, S. 58-66.

Schnabel T., Petutschnigg A., Jäger A.: Kaskadische Nutzung nicht holzartiger Biomasse. Biobased Future, Nummer 5, Jänner 2016, S. 18.

Tondi G., Link M., Kolbitsch C., Lesacher R., Petutschnigg A.: Pilot plant up-scaling of tannin foams. Industrial Crops and Products 79 (2016) 211-218. Available online 21 November, Science Direct.

Tondi G., Link M., Kolbitsch C., Gavino J., Luckeneder P., Petutschnigg A., Herchl R., Van Doorslaer C.: Lignin-based foams: Production process and characterization. BioResources 11(2), 2972-2986, erschienen Mai.

Bücher und Buchbeiträge

Young T.M, Khaliukova O., Petutschnigg A., Barbu M. (2016): 4th International Conference on Process Technologies for the Forest and Biobased Products Industries, PTF BPI 2016, October 25-26, 2016, St. Simons, Georgia, USA. Book of Abstracts, ISBN 978-0-9982277-0-2, 40 Seiten.

Konferenzbeiträge und Conference Proceedings

Barbu M.-C. (2016): Entwicklung neuer leichter Verbundwerkstoffe aus Holz und anderen Materialien. Keynote anlässlich des HOLZ+ Symposium für Verbundtechnologien, 21. Januar, Augsburg.

Berger G., Barbu M. C., Huber H., Berger J., Schwarzmann G. (2016): Applying biomimicry in lightweight wood panel development. WCTE 2016 World Conference on Timber Engineering, August 22-25, Vienna, Austria. E-book, Full Papers, ISBN 978-3-903024-35-9, S. 418-425.

Ebner M., Petutschnigg AJ., Huskic A., Sternad B., Gaubinger K. (2016): Testing Wood Dowel Welding in Wood Based Materials. 4th International Conference on Process Technologies for the Forest and Biobased Products Industries, PTF BPI 2016, October 25-26, St. Simons, Georgia, USA. Book of Abstracts, ISBN 978-0-9982277-0-2, S. 37-38.

Entacher K., Irshaid N., Streibl P., Petutschnigg AJ. (2016): Ski pairing by evolutionary algorithm methods – an applied mathematical education example. 4th International Conference on Process Technologies for the Forest and Biobased Products Industries, PTF BPI 2016, October 25-26, St. Simons, Georgia, USA. Book of Abstracts, ISBN 978-0-9982277-0-2, S. 22-23.

Griebeler C. G. de O., Tondi G., Schnabel T., Iglesias C. (2016): Effects of natural weathering on surface colour and cracking of thermally modified eucalyptus wood. COST Action FP1407, 2nd Conference “Innovative production technologies and increased wood products recycling and reuse”. Mendel University in Brno, Czech Republic, 29 – 30th September. ISBN 978-80-7509-429-2, S. 61-62.

Kain G., Charwat-Pessler J., Barbu M.-C., Plank B., Richter K., Petutschnigg A. (2016): Analyzing Wood Bark Insulation Board Structure Using X-ray Computed Tomography and Modeling its Thermal Conductivity by Means of Finite Difference Method. 6th Conference on Industrial Computed Tomography (ICT 2016), 9th-12th February, FH OÖ, Campus Wels.

Kain G., Lienbacher B., Barbu M.C., Plank B., Richter K., Petutschnigg A. (2016): Tree bark insulation panels for special purpose insulation: Evaluation and discrete modeling of structure property relationships. WCTE 2016 World Conference on Timber Engineering, August 22-25, Vienna, Austria. E-book, Full Papers, ISBN 978-3-903024-35-9, S. 356-363.

Kavian-Jahromi N., Schagerl L., Dürschmied B., Enzinger S., Schnabl C., Schnabel T.,  Petutschnigg A. (2016): Mikrobiologische Untersuchungen zur antimikrobiellen Wirkung von Lärchenholz mit Fokus auf den Einsatz in hygienisch sensiblen Bereichen. 10. Forschungsforum der österreichischen Fachhochschulen: „Brücken bauen – Perspektiven gestalten“ … für Wirtschaft, Hochschule und Öffentlichkeit, 30. und 31. März 2016, Fachhochschule des BFI Wien, Tagungsband. Erschienen April, 8 Seiten.

Meints T., Schnabel T., Huber H., Paar K., Hansmann C. (2016): Darkening of oak wood during different drying processes. Eco-Efficient Resource Wood with Special Focus on Hardwoods in conjunctioin with the “Conference of Climate protection through forestry, renewable materials, smart technologies and environmental education” and with the COST Action FP1407 Workshop and with the “Climate protection through forestry” conference, Sopron, 8-9th September, ISBN 978-963-334-291-6, S. 56-57.

Petutschnigg A.J. (2016): Industry 4.0 – A new perspective for forest products industry. 4th International Conference on Process Technologies for the Forest and Biobased Products Industries, PTF BPI 2016, October 25-26, St. Simons, Georgia, USA. Book of Abstracts, ISBN 978-0-9982277-0-2, S. 1 (Keynote).

Petutschnigg A., Charwat-Pessler J., Entacher K., Schraml R., Uhl A. (2016): Digital image acquisition to achieve log traceability – field study. 4th International Conference on Process Technologies for the Forest and Biobased Products Industries, PTF BPI 2016, October 25-26, St. Simons, Georgia, USA. Book of Abstracts, ISBN 978-0-9982277-0-2, S. 16.

Schnabel T., Haas R., Huber H., Petutschnigg A. (2016): Surface modification using infrared radiation. COST Action FP1407, 2nd Conference “Innovative production technologies and increased wood products recycling and reuse”. Mendel University in Brno, Czech Republic, 29 – 30th September. ISBN 978-80-7509-429-2, S. 87-88.

Tondi G., Luckeneder P., Gavino J., Thevenon M.-F., Petutschnigg A. (2016): Tannin bio-copolymers as wood preservatives. WCTE 2016 World Conference on Timber Engineering, August 22-25, Vienna, Austria. E-book, Full Papers, ISBN 978-3-903024-35-9, S. 450-457.

Tudor E. M., Barbu M. C., Petutschnigg A., Réh R. (2016): Thin wear layers of tree bark as a substitute for cork in flooring tiles. WCTE 2016 World Conference on Timber Engineering, August 22-25, Vienna, Austria. E-book, Full Papers, ISBN 978-3-903024-35-9, S. 434-441.

Wagner K., Huber H., Petutschnigg A., Schnabel T. (2016): Analysis of Condensation Products of Poplar Wood during Drying Process. Eco-Efficient Resource Wood with Special Focus on Hardwoods in conjunctioin with the “Conferene of Climate protection through forestry, renewable materials, smart technologies and environmental education” and with the COST Action FP1407 Workshop and with the “Climate protection through forestry” conference, Sopron, 8-9th September, ISBN 978-963-334-291-6, S. 89-90.

Young T. M., Barbu M. C., Hindman D., Weissensteiner J., Tudor E. M. (2016): Comparisons of the production standards for cross laminated timber (CLT) in Europe versus USA. WCTE 2016 World Conference on Timber Engineering, August 22-25, Vienna, Austria. E-book, Full Papers, ISBN 978-3-903024-35-9, S. 4380-4387.

Vorträge

Schnabel T. (2016): „Nutzbarmachung bioaktiver Substanzen bei der Trocknung“. Präsentation des FE Projektes BioSubTro im Rahmen der Veranstaltung Produktion der Zukunft: Stakeholderdialog „Biobased Industry“ von der Österreichischen Gesellschaft für Umwelt und Technik und dem bmvit (Fördergeber), 23.11., Wien.









Aktuell

Innovationen von heute bestimmen Lebensqualität...

Im Beisein von Landtagspräsidentin Brigitta Pallauf und Landesrätin Martina Berthold fand...

mehr

Neue Studie zur Lebensqualität in Salzburg

Am 27. April präsentierte das ForscherInnen-Team rund um Markus Pausch im Beisein von...

mehr